Canon FT - 25

Film Loading
The Canon FT accepts any standard 35mm film roll in
cartridge for daylight loadin g. When loading a new film ,
always avoid direct sunlight .
1
2
Raise the back cover lock and make a half turn counter -
clockwise. The cover will rise slightly .
Open
the cover fully. When the back cover is opened ,
the QL cover opens simultaneously .
• The QL cover automatically opens and closes with the
back cover . Do not touch the QL cover .
3
Raise the film rewind crank and pull it all the way up .
Face
the film cartridge as illustrated, and insert it
into the cartrid ge compartment. Push the crank back to
its former position again. The crank fork will slip into
the axis of the film cartrid g e. I n case the crank does
not fully return, turn it slightly to the left or right.
4
Ho ld the film cartrid ge down with the left hand so
that it does not rise, and lay the tip of the leader
above the " red" film set mark.
25