Canon FT - Rewinding Exposed Film

Film Rewinding
When the film reaches the end and the film advance lever
stops, rewind
the film into the cartridge as soon as possible.
Be sure
not to open the back cover before rewinding.
Otherwise, the entire roll will be exposed and ruined as
the exposed film is naked within . the camera.
1
2
Press in the rewinding button.
Raise the film rewind crank, turn it in the direction
of the arrow, and rewind the film into the cartridge.
When the rewinding button stops revolving and rewinding
resistance becomes light , stop rewinding immediately.
3
4
Open the back cover.
Pull up the rewind knob fully and remove the cartridge .
• Once the rewinding button has been pressed, the finger
may be removed. The button will pop out automatically
when the film advance lever is wound .
• If you force the film advance lever after the film reaches
its end, the film will become detached from the cartridge
spool or tear, and rewinding will become impossible. If
this happens, open the back cover and remove the film
only in a darkroom.
28