Canon FT - Creating Double Exposures

Double Exposures
Although Canon FT is designed to prevent double expo·
sures being made by mistake , a double ex posure can be
made by the following steps :
1 When the first exposure has been made, press in the
rewinding button.
2 Rewind the film with the rewinding crank by watching
the mark on the rewinding button carefully.
3 Stop rewinding when the mark has made a 3/4 turn,
i.e., 270 °.
4
Next, wind the film advance lever while lightly holding
the rewinding crank. When resistance is felt on the
rewinding crank, stop winding .
5
Wind the film advance lever once more . The camera
is ready for another exposure .
• By repeating the above process, any number of expo·
sures on the same frame can be made. The frame counter
will, however, continue to advance with each exposure.
36