Canon FT - 26

5 Bring down the QL cover to hold the film in place by
closing the back cover . Look through the sprocket
window to see if the film is correctly engaged on the
sprocket.
6 Press down on the back cover to prevent it from
rising , and turn the back cover lock clockwise .
• If the film is sagging , the cartridge will rise and the
back cover will not close .
7 Leave the lens cap on and make three blank shots,
each time turning the film advance lever. The frame
counter will advance from the" S" mark to "0" . With
one more advance , the camera will be ready for the first
shot .
26