17
Features of the Scanner
The main features of the DR-6030C document scanner are described
below.
● FastDocumentFeeding
The scanner can scan a maximum of 60 documents per minute in
a range of sizes from business cards to A3 size. (Scanning
conditions: Black and white, LTR/A4 size portrait, two sided, 200
dpi.)
● USBinterfacesupported
The scanner supports USB interface that was provided as standard
on your computer.
● Color/GrayscaleSupport
Documents can be scanned in 24-bit color or 256-level grayscale.
● SupportsaVarietyofScanningModes
The scanner supports the following scanning modes, depending on
the document type:
• Single-sided/double-sidedmode
• Singlesheet/dualfeedingpath
● U-TurnPath
Documents are fed and ejected from the front of the scanner.
● StraightPath
Documents are ejected to the back of the scanner. Note, the ejected
documents are stacked in reverse order to how they were fed.
● PaperSizeDetection
The scanner automatically detects the size of a scanned document
and eliminates any unnecessary space around the edges of the
image when storing it, even when storing a document of irregular
size.
● DoubleFeedDetection
The scanner stops feeding documents after detecting more than
one document being fed at the same time.
● SkewDetection
The scanner stops feeding documents after detecting skewed
document hitting the edges of the document feed opening.
● Deskew
The scanner straightens an image after detecting an image on a
document that was loaded askew.
● AutoColorDetection
The scanner detects whether the scanned document is in color or
black-andwhite, and save the image accordingly.
● CardScan
It is possible to scan business card.
● CharacterOrientationDetector
Identifies the orientation of characters in a document, and rotates
the image so the orientation of the scanned characters is straight.
● TextEnhancementModes
The scanner is equipped with an Advanced Text Enhancement
Mode to enhance the text of documents with dark or uneven
backgrounds, and an Advanced Text Enhancement II mode to
enhance the text when both the text and background are light.
*These modes may not work, depending on the type of document.
● DropoutColor
The scanner is equipped with a Dropout Color function that allows
you to specify a color for the scanner to omit from scanned images.
● AutoStart
The scanner is equipped with an Auto Start function that
automatically initiates scanning when a document is placed in the
document feed tray.
● SkipBlankPageFunction
The scanner is equipped with a Skip Blank Page function that
allows it to scan a document regardless of whether every document
is two-sided or onesided.
● PrescanFunction
The scanner is equipped with a Prescan function that allows you to
adjust the contrast and brightness of a prescanned image and then
send the adjusted image to the application software, without
needing to scan the document again.