Canon imageFORMULA DR-6030C User Manual

22
How to Place Documents
Switching the Feed and Eject
Methods
Switch the feed and eject methods based on the type of document you
are scanning.
Standard feeding is used to feed documents one page at a time. Non
separation feeding is used to feed bound or fastened multi-page
documents without separating them.
Feed and Eject Methods for Different Document Types
The U-turn path is used when the straight path tray at the rear of the
scanner is closed, and the straight path is used when it is opened.
U-turn path Straight path
Standard feeding
Non separation feeding
Document
type
Feed method
Eject
method
Remarks
Plain Paper Either Either
Plastic
cards
Non
separation
feeding
Straight path
The results of
scanning embossed
cards are not
guaranteed.
Non-embossed
cards can be placed
at one time (Place
cards vertically).
Thick paper Either Straight path
Thin paper Either Either
Bound or
fastened
paper (e.g.,
invoices)
Non
separation
feeding
Either
Long
documents
Non
separation
feeding
Either
Standard feeding is used when the feed selection lever at the front of the
scanner is raised, and non separation feeding is used when it is lowered.

Canon imageFORMULA DR-6030C Specifications

Power

power consumption	46.5W or Less
power consumption (energy saving mode)	3.7W or Less

Document Handling

document width	2.1” - 11.8”
document length	2.8” - 17”
long document mode length	Up to 118”

Document Weight and Capacity

automatic feeding weight	14 - 32 lb. Bond
manual feeding weight	11 - 40 lb. Bond
feeder capacity	100 Sheets

Scanning Capabilities

optical resolution	600 dpi
output resolution	100/150/200/240/300/400/600 dpi
scanning speeds (simplex, black and white)	Up to 80 ppm

Weight and Dimensions

height	7.5”
width	15.6”
depth	12.3”
weight	23 lb