Canon imageFORMULA DR-6030C User Manual

32
Setting the Scanner Driver
When you scan a document in an ISIS compatible (CapturePerfect,
etc.) or TWAIN compatible application, open the scanner driver and
configure the scanning conditions and other settings.
This section describes the configuration and functions of the scanner
driver.
Configuration and Functions of the
Scanner Driver
The scanner driver consists of the following tabs.
Hint
For details on the setting screen, see the Help of the scanner driver.
Click the [Help] button of the driver to display help related to the
corresponding tab or dialog box.
[Basic] tab
Configure basic scanning conditions such as the mode, page size,
resolution, and scanning side.
In addition, you can click the [Area] button and specify the area to be
scanned.
Hint
Depending on the ISIS compatible application, the application may
have its own screen for setting scanning conditions. If the scanner
driver is opened in such an application, setting items related to the
functions provided by the scanner driver other than scanning
conditions will be displayed on the [Basic] tab.
[Brightness] tab
Adjust the brightness and contrast of scanned images.
In addition, you can also click [Gamma] and set the gamma correction
value for scanned images.

Canon imageFORMULA DR-6030C Specifications

Power

power consumption	46.5W or Less
power consumption (energy saving mode)	3.7W or Less

Document Handling

document width	2.1” - 11.8”
document length	2.8” - 17”
long document mode length	Up to 118”

Document Weight and Capacity

automatic feeding weight	14 - 32 lb. Bond
manual feeding weight	11 - 40 lb. Bond
feeder capacity	100 Sheets

Scanning Capabilities

optical resolution	600 dpi
output resolution	100/150/200/240/300/400/600 dpi
scanning speeds (simplex, black and white)	Up to 80 ppm

Weight and Dimensions

height	7.5”
width	15.6”
depth	12.3”
weight	23 lb