Print quality and color settings
1 1. On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired.
Adjustment Item
Description
C Cyan
D Magenta
E Y ellow
Correct color tones by adjusting the levels of Cyan ,
Magenta , and Y ellow .
F Brightness Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
G Contrast
Adjust the contrast of the darkest and lightest
portions relative to each other .
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
H Saturation Adjust the level of color saturation, in a range from
subdued to vivid.
I Gray T one Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
12. Click OK to close the Color Settings dialog box.
13. Access the Page Setup pane.
14. Conrm the settings of A Media Source and C Page Size .
15. Conrm the print settings, and then click M Print to start printing.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P .493)
Enhanced Printing Options 203
To Next Page
Loading...
Need help?
General