Responding to Messages
Error Messages
W arning messages
W arning messages are shown on lines 2-4 of the Display Screen .
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
• GARO Wxxxx (x represents a number) (→P .709)
• Ink Level: Check (→P .701)
• End of paper feed. (→P .698)
• Prepare for parts replacement. (→P .709)
• Parts replacement time has passed. (→P .709)
• Problem with Printhead x (x is L, R, or LR) (→P .707)
• Prepare for maint cart replacement. (→P .708)
• Paper Mismatch (→P .691)
• Papr Size Mismatch (→P .692)
• Papr T ype Mismatch (→P .691)
Error messages (if action can be taken)
Check the message and take the appropriate action.
• Ink tank is empty . (→P .703)
• Ink insufcient. (→P .702)
• No ink tank loaded. (→P .701)
• Ink tank error . (→P .703)
• T op cover is open. (→P .709)
• Sheet printing is selected. (→P .694)
• Cannot calibrate. (→P .705)
• Cannot feed paper . (→P .695)
• Insufcient paper for job (→P .693)
• Use another paper . (→P .704)
• This paper cannot be used. (→P .692)
• Cannot print as specied. (→P .704)
• Manual printing is selected, but a roll is loaded. (→P .695)
• W rong paper feed slot for this paper type. (→P .695)
• Cannot adjust band. (→P .704)
• Unknown le. (→P .709)
• Borderless printng not possible. (→P .696)
• x printhead error (x is Left or Right) (→P .707)
• x printhead needs cleaning. (x is Left or Right) (→P .706)
• PHeads: wrong pos. (→P .706)
• Cannot adjust printhead. (→P .705)
• Multi-sensor error (→P .710)
• Maintenance cartridge problem. (→P .708)
• Maintenance cartridge full. (→P .708)
• No maintenance cartridge. (→P .708)
• No Maintenance Cartridge capacity . (→P .708)
• Paper Mismatch (→P .691)
• Paper jam. (→P .699)
• Paper loaded askew . (→P .697)
Error Message 689
To Next Page
Loading...
