Handling rolls
Attaching the Spacer for Borderless Printing
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on
the Roll Holder .
Insert the protrusions (b) of the Spacer for Borderless Printing (a) into the holes (c) of the Roll Holder , as
shown.
Important
• If you use an A1 or A2 roll for borderless printing, be sure to attach the provided Spacer for Borderless
Printing on the Roll Holder . If you do not attach the Spacer for Borderless Printing on the Roll Holder , an
error message will be displayed and printing is not possible.
Removing the Spacer for Borderless Printing
Pull out the Spacer for Borderless Printing from the Roll Holder , as shown.
Handling Paper 145
To Next Page
Loading...
