Color adjustment
Follow these steps to execute color calibration.
1. Load paper compatible with color calibration.
When using sheets, load paper A4 (210.0×297.0 mm)/Letter (8.5×1 1 in) vertical, or larger . One
sheet is required.
When using a roll, load a roll 10 inches (254 mm) or wider .
• Loading and Printing on Rolls (→P .80)
• Loading and Printing on Sheets in the Paper Feed Slot (→P .85)
2. Press the Menu button to display MAIN MENU .
3. Press ▲ or ▼ to select Adjust Printer , and then press the ► button.
4. Press ▲ or ▼ to select Calibration , and then press ► .
5. Press ▲ or ▼ to select Auto Adjust , and then press the ► button.
6. Press ▲ or ▼ to select Y es , and then press the OK button.
After the printer measures environmental conditions and checks the paper , a test pattern for color
calibration is printed. An adjustment value based on the results of printing is set automatically .
After adjustment is complete, the printer goes online or of ine automatically .
602 Maintenance
To Next Page
Loading...
