Messages regarding paper
Insufcient paper for job
Cause Corrective Action
Follow the steps below to replace the roll.
1. Remove the roll.
( → P .122)
( → P .1 18)
2. Load a roll with enough paper left.
( → P .1 16)
( → P .1 19)
3. If no barcode was printed on the roll, specify the
paper type.
( → P .124)
4. Select the paper length, unless a barcode was
printed on the roll and you have deactivated
automatic detection of the remaining roll paper .
( → P .125)
Hold down the Stop button for a second or more to
cancel printing.
The printer has received a print job longer than the
amount of roll paper left.
Press the Online button to resume printing.
However , the roll paper may run out during the
print job and you may not be able to print all of the
document.
Error Message 693
To Next Page
Loading...
Need help?
General