imagePROGRAF iPF6400S Service Guide
imagePROGRAF iPF6400S Service Guide September 2013
Page 16
Table 6 - Estimated Installation Times
Description Estimated Time
imagePROGRAF iPF6400S Main Unit (with
Stand)
25 minutes
Printhead PF-05 (x2) 5 minutes
Ink Tanks (time includes installation of all eight
(8) ink tanks)
25 minutes
Starting from an unpacked condition, installation times shown in Table 6
above are the estimated times required for installation. They are calculated
based on man-hours.
F. Installation / Service Support Tools
The tools required to mutually support these printers are in the Table
below.
Table 7 - imagePROGRAF iPF6400S Installation Tools
Tool Use
Hexagonal wrench (Provided with the printer
stand)
For assembling stand and removing the fixed
parts
Cut sheet paper A3 size or larger, or roll paper For test print after confirming printer operation
Cutter For unpacking
In addition to the standard tools used to service this device, the following
special tools, solvents, & oils should also be carried when servicing the
imagePROGRAF iPF6400S.
Table 8 - Special Tools, Solvents, & Oils List
Tool/Description
Part Number
Use
Cover Switch Tool QY9-0103-000 For activating the cover switch
Syringe CK-0541-000 For draining ink manually
Tube QA2-6161-000 For draining ink manually
Grease PG-5000H CK-0562-000
For applying to
Service Manual (Successor to Molycote)
Rubber gloves QC1-5547-000
Use for cleaning and to prevent from dirtying
Silbon paper CK-0336-000 For cleaning
Pen flashlight CK-0327-000 For locking/unlocking the carriage
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
To Next Page
Loading...
