Canon imagePROGRAF iPF6400S - Appendix; Specifications; XI. Appendix

imagePROGRAF iPF6400S Service Guide
imagePROGRAF iPF6400S Service Guide September 2013
Page 35
XI. Appendix
Note: All Specifications are subject to change without notice.
A. Specifications
Table 14 - imagePROGRAF iPF6400S Specifications
Item Specifications
Type Bubble jet printer
Media feed system Roll paper/ Cut sheet (Manual switching)
Media Loading
Capacity
Roll paper
One (1) roll
Outer diameter: Approximately 150mm or less
2-inch (standard) /3-inch (standard)
Manual feed (front)
One (1) sheet
Delivery method
Face-up delivery towards the front
Delivery capacity One (1) sheet
Cutter
Automatic (Round blade), self-propelled
Media width for borderless printing
Approximately 10" (254mm), B4 (257mm), 14" (356mm),
16" (407mm), A2 (420mm), A2+/17" (432mm), B2 (515mm),
A1 (594mm), 24" (610mm)
Maxmimum
Media size
Roll paper: width Approximately 203mm to 610mm
Roll paper: length Approximately 18m (depending on OS and application)
Cut sheet paper: width Approximately 203mm to 610mm
Cut sheet paper:
length
Approximately 1.6m
Print Assurance
Area
Roll paper
Margin of leading edge: Approximately 20mm,
Margin of trailing edge: Approximately 5mm,
Margin of left and right edges: Approximately 5mm
Cut sheet paper
Margin of leading edge: Approximately 20mm
Margin of trailing edge: Approximately 23mm,
Margin of left and right edges: Approximately 5mm
Printable Area
Roll paper
Margin of leading edge: Approximately 3mm
Margin of trailing edge: Approximately 3mm,
Margin of left and right edges: Approximately 3mm
[Without borders] Margin of leading edge: 0mm
Margin of trailing edge: Approximately 0mm
Margin of left and right edges: Approximately 0mm
Manual feed (front)
Margin of leading edge: Approximately 3mm
Margin of trailing edge: Approximately 3mm
Margin of left and right edges: Approximately 3mm
Paper Thickness Approximately 0.07mm to 0.8mm
Detection Function
No paper, leading edge/trailing edge of paper, paper
width/skew, paper slip, purge motor home position, carriage
position, head existence, remaining amount of ink, ink tank
existence, waste ink full, head overheat, cover open, roll
cassette open/close, mist fan lock, cutter position, ink
supply valve open/close, non-ejection of ink
Self-diagnostic Function
LED flashes and lights up on the operation panel, and
displays an error on LCD.
Printer Language GARO (Graphic Arts Language with Raster Operation)
Memory 256MB