Canon IMAGERUNNER 2530 User Manual

0
0
0-3
0-3
Safety Precautions > Power Supply
Safety Precautions > Power Supply
Turn power switch ON
The machine is equipped with 2 power switches: main power switch and control panel power
switch.
The machine goes on when the main power switch is turned on (i.e., other than in low power
mode, sleep mode).
Main power switch
Control panel
power switch
F-0-3F-0-3
Power Supply
1. As a general rule, do not use extension cords. Using an extension cord may
result in a re or electrical shock. If an extension cord must be used, however,
use one for local rated voltage and over, untie the cord binding, and insert
the power plug completely into the extension cord outlet to ensure a rm
connection between the power cord and the extension cord.
2. The socket-outlet shall be installed near the equipment and shall be easily
accessible.
F-0-4F-0-4

Canon IMAGERUNNER 2530 Specifications

General

Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Warm-up Time	30 seconds or less
Multiple Copy	Up to 999 copies
Interface	USB 2.0, Ethernet
Type	Monochrome Laser
Print Resolution	600 x 600 dpi
Copy Speed	Up to 30 ppm (A4)
Network Connectivity	Ethernet
Paper Input (Standard)	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Paper Weight	64 to 90 g/m²
First Copy Out Time	6.4 seconds or less
Zoom	25-400%
Scan Speed	25 ipm
Scan to	USB
Print Speed (Black)	Up to 30 ppm (A4)