Canon IMAGERUNNER 2530 User Manual

9
9
9-45
9-45
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
Installation > Cst Heater Kit-J1 Installation Procedure > Installation Procedure
Installation Procedure
1) Remove the rear cover (right).
Screws (3 pcs.)
Claws (2 pcs.)
Claws
x3
x2
•
•
F-9-92F-9-92
2) Cut off the blindfold cover of the rear cover (right) by a side cutter as shown.
CAUTION:
Finish the surface of the cut part of the rear cover (right) to remove burrs.
F-9-93F-9-93
3) Remove the left rear blindfold cover.
Screw (1 pc.)
•
F-9-94F-9-94
4) Remove the left rear cover.
Screws (3 pcs.)
x3
•
F-9-95F-9-95

Canon IMAGERUNNER 2530 Specifications

General

Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Warm-up Time	30 seconds or less
Multiple Copy	Up to 999 copies
Interface	USB 2.0, Ethernet
Type	Monochrome Laser
Print Resolution	600 x 600 dpi
Copy Speed	Up to 30 ppm (A4)
Network Connectivity	Ethernet
Paper Input (Standard)	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Paper Weight	64 to 90 g/m²
First Copy Out Time	6.4 seconds or less
Zoom	25-400%
Scan Speed	25 ipm
Scan to	USB
Print Speed (Black)	Up to 30 ppm (A4)