Canon IMAGERUNNER ADVANCE C5035 Getting Started

8
Managing the Machine from a Computer
Before You Start the Remote UI
8-4
Enabling the Remote UI
You must use the machine's control panel to enable the Remote UI.
By setting [Remote UI] to ‘On’, you can open a necessary port. However, it is recommended that it is set to ‘Off’, if a port is not used. If you
leave the port open, an unauthorized user may access the machine.
1 Press
(Settings/Registration)
→ [Management Settings] → [License/Other] → [Remote UI].
2 Select [On] → select whether to use SSL.
Select [Off ] to disable the Remote UI.
<Use SSL>:
[On]: Allows secured transmission using SSL.
[Off ]: Prohibits secured transmission using SSL.
<Use Reference Print >:
[On]: Allows printing by entering its URL.
[Off ]: Prohibits printing by entering its URL
Any changes made to <Use SSL> are also applied to <SSL Settings> in <Use HTTP> in [MEAP Settings] in [Management Settings]
(Settings/Registration).
3 Press [OK].
The selected mode is set.
4 Turn the main power of the machine OFF, wait 10 seconds, and then turn the power ON.
The [Remote UI] setting is made effective only after turning the machine’s main power OFF, and then ON. For information on how
to turn ON and OFF the main power of the machine, see Chapter 1, “Before You Start Using This Machine.”

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan