1
Before You Start Using This Machine
Installation Location and Handling
1-2
Installation Location and Handling
This section describes precautions for installation location and handling. We recommend that you read this section prior to
using this machine.
Installation Precautions
Avoid Installing the Machine in the Following Locations
Avoid locations subject to temperature and humidity extremes, whether low or high.
For example, avoid installing the machine near water faucets, hot water heaters, humidifiers, air conditioners, heaters, or stoves.
Avoid installing the machine in direct sunlight.
If this is unavoidable, use curtains to shade the machine. Be sure that the curtains do not block the machine's ventilation slots or louvers,
or interfere with the electrical cord or power supply.
Avoid poorly ventilated locations.
This machine generates a slight amount of ozone and other substances during normal use. Although sensitivity to these substances
may vary, this amount is not harmful. Ozone may be more noticeable during extended use or long production runs, especially in
poorly ventilated rooms. It is recommended that the room be appropriately ventilated, sufficient to maintain a comfortable working
environment, in areas of machine operation.
Avoid locations where a considerable amount of dust accumulates.
■
■
■
■