Canon IMAGERUNNER ADVANCE C5035 Getting Started

16
Before Using the Remote Scan Function
Settings Required Prior to Remote Scanning
16-4
Settings Required Prior to Remote Scanning
Once you have installed the scanner driver, the following settings are required in order to perform remote scanning.
For details about this procedure, see the Network ScanGear Installation Guide.
Switching the Scanner Online and Offline
In order to start the scanner driver and scan, the scanner must be set to [Online] beforehand at the device.
When the scanner is online, communication with devices connected over a network is possible and the scanner can receive data from
computers.
Selecting the Network Scanner You Want to Use
In order to scan using Color Network ScanGear, select the device on the network that you want to use as a scanner using the ScanGear
Tool. Because a scanner is not selected immediately after installation, this operation must be performed before use.
The ScanGear Tool is software that is installed together with Color Network ScanGear.
■
■

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan