Canon IMAGERUNNER ADVANCE C5035 Getting Started

10
Updating the Firmware
10-2
Overview
Using the "Register/Update Software" function, you can update the firmware of the machine to the most recent version. You
can use this function from both the touch panel display and the computer (Remote UI).
Multiple users cannot use the “Register/Update Software” function from the Remote UI at the same time.
If another user is logged in to SMS (Service Management Service), you cannot use the “Register/Update Software” function from the
Remote UI.
If the following procedure is performed, you cannot use the “Register/Update Software” function from the Remote UI for a specified time:
when Remote Login Service of the SMS is set and the Web browser was closed without pressing [Portal] or [Log Out]
when Remote Login Service of the SMS is not set and the Web browser was closed without pressing [Portal]
when the Web browser was closed without pressing [Log Out from SMS], [To Remote UI], or [Log out] of the SMS
For more information on SMS, see e-Manual > MEAP.
You can update the firmware using the data that is distributed separately from the machine.
Registering the Firmware from the Remote UI
Obtaining the Firmware
This Machine
Updating the
Firmware
•
•
•
-
-
-
•

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan