Canon IMAGERUNNER ADVANCE C5035 Getting Started

9
Installing the System Options/MEAP Applications
Installing by Not Connecting this Machine to an Outside Network
9-12
Installing the System Options Using the Touch Panel Display
You can install the system options to the machine by registering the license key using the touch panel display.
To perform the procedures described in this section, you must log in to the machine as an administrator. (See e-Manual > Settings/
Registration.)
1 Press
(Settings/Registration)
→ [Management Settings] → [License/Other] → [Register License].
2 Enter the license key using - (numeric keys) → press [Start].
Details of each item are shown below.
[ ][ ]:Press to move the cursor.
[Backspace]: Press when you entered a wrong number. The number in front of the cursor is deleted and you can reenter the correct
number.
If the message <The value for the license key is not correct. Check the license key.> is displayed, press [OK] → enter the correct license
key.
If the message <The feature required for installation is not present.> is displayed, you cannot register the license key. Press [OK] →
cancel the registration.
3 Press [OK].
The registered functions can be used only after you restart the machine.

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan