Canon iPF780 Series - Page 16

Chapter 1
1-6
- Changing from the regular position to extended position B.
1) Grasp the output stacker handle [1] to set the guide as shown in the following illustration.
F-1-16
2) Open the output stacker ejection guides [1] toward the front.
F-1-17
- Changing from the extended position B to regular position.
1) Close the output stacker ejection guides [1] and pull the output stacker release lever [2] forward to release the lock, and then grasp the output stacker handle [3]
to return the guide.
F-1-18
[1]
[1]
[1]
[2]
[3]