Correction, etc. in Image Settings on the Advanced Mode tab of
ScanGear.
Refer to "Image Settings" for your model from Home of the Online Manual for details.
Check 7: If the color tone of images is different from the original
document, take the following measures and scan again.
• On the Advanced Mode tab of ScanGear, set Image Adjustment in Image Settings to
None.
Refer to "Image Settings" for your model from Home of the Online Manual for details.
• On the Color Settings tab in the Preferences dialog box of ScanGear, set Color
Matching.
Refer to "Color Settings Tab" for your model from Home of the Online Manual for
details.
479
To Next Page
Loading...
