35
Connecting the Projector
Projecting an Image
Connecting the Projector to the Computer
Connect the projector to the computer.
Before connecting the cables, turn off both the projector and computer.
■ Connecting to RGB Monitor Output Terminal (analog connection)
Supplied computer connection cable (Input signal type: [ANALOG PC-1] - P47)
VGA cable (Input signal type: [ANALOG PC-2] - P47)
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Computer
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
Supplied computer connection cable
To input a corresponding
audio signal:
Commercial audio cable
To ANALOG PC-1/
DVI-I IN
To AUDIO IN
Projector
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
To input a corresponding
audio signal:
Commercial audio cable
Commercial VGA cable
To AUDIO IN
To ANALOG PC-2/
COMPONENT IN
Computer
Projector
To Next Page
Loading...
Need help?
General
