Adjusting Image
52
Adjusting the Focus
You can adjust the focus with the FOCUS button. The projection image may be out of
focus if the projection distance is beyond the range of 1.2 m (3.9') to 9.1 m (29.6'). Move
the projector installation position if such is the case. (P31)
■ Auto focusing
Press the FOCUS button, and then the AUTO SET button.
■ Manual focusing
1 Press the FOCUS button to pop up a window shown at the lower right.
2 Press the pointer buttons to adjust the focus.
3 When the focus is adjusted optimally, press the OK button or the FOCUS button.
If you select [16:9 D. image shift] for [Screen aspect], the auto focus function will be dis-
abled.
Remote control Top control
[ ] / [ ]: Rough adjustment.
[<] / [>]: Fine adjustment.
<
<
Remote control Top control
To Next Page
Loading...
Need help?
General
