Canon ReallS SX80 User Manual

83
Setting Display Status
Setting Up Functions from Menus
Displaying a User Logo (No signal screen)
[User screen settings] - [No signal screen]
You can display a user logo on a screen
when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
• [Blue] is the factory default.
• [User logo] is available only when a
user's logo has been registered.
Displaying a User Logo (BLANK)
[User screen settings] - [Screen when blank]
You can display a user logo a screen
when the projected image is blackened
out temporarily by pressing the BLANK
button on the remote control.
Press the OK button to accept your setting
and then press the MENU button.
• [Black] is the factory default.
• [User logo] is available only when a
user's logo has been registered.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Black The screen is all black.
Displays no user logo.
Blue The screen is blue background.
Displays no user logo.
User logo Displays a user logo.
User screen settings
Display settings
No signal screen
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Black The screen is all black.
Displays no user logo.
Blue The screen is blue background.
Displays no user logo.
User logo Displays a user logo.
User screen settings
Display settings
Screen when blank

Canon ReallS SX80 Specifications

General

Brand	Canon
Model	ReallS SX80
Category	Projector
Language	English