Canon ScanFront 220 User Manual

Canon ScanFront 220/220P System Software Update
Instructions
ScanFront Version Up Procedure Version 1.0 Page
1
ScanFront 220/220P system software updates are distributed as .bin files. These files
can be downloaded from the Drivers and Downloads area of the Canon USA support web
site (http://www.usa.canon.com/html/download/sf220.html). Before you can download the
update file you will be prompted to input the 17 digit alphanumeric Product Key located on
the underside label of the ScanFront. When entering the Product Key be sure to use upper
case for any alpha characters in the key. Once the file is downloaded the device can be
updated using the same ScanFront Administrator Mode Web Menu that is used for
configuration and day to day management of the device. The following are the procedures for
applying these software updates.
The configured settings of the device should be backed up before performing a system
software update. Applying new system software will not erase configuration settings such as
user accounts, address book entries, job buttons, etc., but it is always advised to perform a
device backup before performing any software update. With that in mind this document starts
with instructions for backing up the configured settings on the ScanFront in the event those
settings need to be restored after the system software has been updated.

Canon ScanFront 220 Specifications

Document Handling

document feeding	Automatic or Manual
document size width	2" – 8.5"
document size length	2.1" – 14"

Power

power consumption	26W or Less

Scanning Specifications

optical resolution	600 dpi
output resolution	100/150/200/300/400/600 dpi
scanning speed black and white simplex	26 ppm
scanning speed black and white duplex	35 ipm
scanning speed grayscale simplex	23 ppm
scanning speed grayscale duplex	23 ipm
scanning speed color simplex	16 ppm
scanning speed color duplex	16 ipm

Memory and Interface

memory size	512MB
interface	Hi-Speed USB 2.0 x 2, LAN 10Base-T/100Base-TX, PS/2 Mouse Port, PS/2 Keyboard Port

Weight and Dimensions

weight	7.5 lb.
dimensions	12.2" x 9.21" x 6.22"

Summary

Canon ScanFront 220/220P System Software Update Instructions

Download Software Update File

Instructions on downloading software update files from Canon USA website using product key.

Backup Device Settings

Importance of backing up configured settings before performing a system software update.

ScanFront 220/220P Configuration Backup Procedure

Obtain Device IP Address

Locate the ScanFront's IP address via the Administrator Settings menu on the device.

Access Administrator Web Menu

Connect to the ScanFront via a web browser and log into Administrator Mode using the IP and password.

Initiate Backup Operation

Navigate to System Settings > Backup/Restore and select 'Backup All Settings'.

Save Backup Configuration File

Utilize the 'Save As' dialog to specify a location and name for the configuration backup file.

ScanFront 220/220P Software Version Update Procedure

Prepare for Software Update

Note the current version and ensure a stable power supply for the device and computer.

Navigate to Version Up Interface

Access the 'Version Up' section within System Settings via the ScanFront's web interface.

Upload Update File

Browse for and select the downloaded .bin update file, then initiate the upload.

Execute Software Update Process

Confirm the update in the dialog box and monitor the file upload and application.

Verify Successful Update

After reboot, check the version number on the touch screen to confirm the update was successful.