Canon SmartBase PC1270D - Printing a List to Check Information Registered in Your Machine

2-6
■ Printing a List to Check Information Registered in Your Machine
You can print the USER’S DATA LIST to check the sender information and current settings of your machine.
1 Press Additional Functions.
2 Use (–) or (+) to select 7.PRINT LISTS.
3 Press OK twice.
• The machine returns to standby mode then prints the USER’S DATA LIST.
The sender information is shown at the beginning of the list. The current settings of the machine are listed after this.
ADDITIONAL FUNCTIONS
7.PRINT LISTS
▲
▼
PRINT LISTS
1.USER DATA
03/12 2001 16:40 FAX 123 4567 CANON 001
✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱
✱✱✱
USER’S DATA LIST ✱✱✱
✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱
1.COMMON SETTINGS
DEFAULT SETTINGS COPY
SW AFTER AUTO CLR DEFAULT MODE
VOLUME CONTROL
KEYPAD VOLUME ON
VOLUME 1
ALARM VOLUME ON
VOLUME 1
TX DONE TONE ERROR ONLY
VOLUME 1
02_EN.fm Page 6 Tuesday, February 19, 2002 8:20 AM