Canon SmartBase PC1270D - Activity Report

7-2
ACTIVITY REPORT
The machine is factory-set to automatically print an ACTIVITY REPORT after every 20 transactions. If you want to print an
ACTIVITY REPORT before it is automatically printed, follow this procedure:
• If you prefer the machine not to print an ACTIVITY REPORT after every 20 transactions, set ACTIVITY REPORT to OFF. (→ p.
9-5)
• You do not need to press Function in step 1 to execute the Report function if REPORT is programmed in PROGRAM 1-TOUCH KEY.
(→ p. 9-4)
1 Press Function.
2 Press Report.
3 Use (–) or (+) to select 1.ACTIVITY REPORT.
4 Press OK.
• The machine prints an ACTIVITY REPORT and returns to standby mode.
Transactions in an ACTIVITY REPORT are listed chronologically.
* The number of pages that have been printed and the number of pages indicated on the report are not the same.
REPORT
1.ACTIVITY REPORT
▲
▼
03/12 2001 17:28 FAX 123 4567 CANON 001
✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱
✱✱✱
ACTIVITY REPORT ✱✱✱
✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱
ST. TIME DESTINATION TEL/ID NO. MODE PGS. RESULT
03/12 15:10 905 795 1111 5001 AUTO RX ECM 1 OK 00’33
03/12 15:14 905 795 1111 5002 AUTO RX ECM 1 OK 00’24
03/12 15:22 Canon TOKYO 03 3758 2111 0001 SEQ. B’CAST ECM 3 OK 01’18
03/12 15:24 Canon AUSTRALIA 2 887 0166 0001 SEQ. B’CAST ECM 3 OK 01’18
03/12 16:10 905 795 1111 5003 AUTO RX ECM 1 OK 00’18
03/12 16:16 2 887 0166 5004 AUTO RX ECM 4 OK 00’59
03/12 16:27 Canon EUROPE 20 545 8545 0002 TRANSMIT ECM 1 OK 01’20
03/12 16:30 Canon EUROPE 20 545 8545 0003 TRANSMIT ECM 1 OK 04’12
03/12 16:53 03 3758 2111 5005 AUTO RX ECM 1 OK 01’16
03/12 17:08 Canon AUSTRALIA 2 887 0166 0004 TRANSMIT 3 NG 00’51
3STOP
03/12 17:20 CANON OPTICS 1 432 2060 0005 TRANSMIT 0 NG 00’01
0 0018
INDICATES AN
ENTRY THAT HAS
APPEARED ON A
PREVIOUS REPORT.
TRANSACTION (TX/RX) NUMBER
TRANSACTION MODE
ERROR CORRECTION MODE TRANSACTION
ERROR PAGE*
ERROR CODE (→ p. 8-2)
Stop/Reset WAS PRESSED DURING TRANSACTION
TRANSACTION DURATION
07_EN.fm Page 2 Tuesday, February 19, 2002 11:03 AM