38
Connecting via WPS (PBC Mode)
4
Select [Connect with WPS].
5
Select [WPS (PBC mode)].
Select [OK] and press <0> to go to
the next screen.
6
Connect to the access point.
Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
Select [OK] and press <0> to
establish a connection with the
access point.
When a connection with the access
point is established, the next screen
is displayed.
For [Camera access point mode] displayed in step 4, see page 50.
To Next Page
Loading...