Canon w-e1 - Connecting to a Detected Network Manually

45
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access points nearby.
1
Select [Wi-Fi function].
 Under the [53] tab, select [Wi-Fi
function], then press <0>.
2
Select an item.
 Use <5> or <9> to select an item,
then press <0>.
3
Select [Select a network].
 Select [OK] and press <0> to go to
the next screen.
Connecting to a Detected Network Manually
Selecting the Access Point