Canon w-e1 - Setting up the Network Manually

90
You can set up the network settings for the camera access point mode
manually. [SSID], [Channel setting], and [Encryption settings] can be
set on each screen displayed.
1
Select [Manual connection].
 Select [OK] and press <0> to go to
the next screen.
2
Enter an SSID (network name).
 Enter any characters using the virtual
keyboard (p.15).
 When you are finished, press the
<M> button.
3
Select the desired channel
setting.
 To specify the settings manually,
select [Manual setting], then turn the
<6> dial.
 Select [OK] and press <0> to go to
the next screen.
Setting up the Network Manually