Canon w-e1 - Specifying Viewable Images

56
You can specify images viewable on a smartphone by operating the
camera. Images can be specified during connection setup or after
the connection is terminated.
1
Select [Wi-Fi function].
 Under the [53] tab, select [Wi-Fi
function], then press <0>.
2
Select [q].
3
Select [Review/change settings].
4
Select [Viewable imgs].
Specifying Viewable Images
If [Viewable imgs] is set to any setting other than [All images], remote
shooting is not possible.
When reconnecting to a smartphone, check the settings of viewable images
before establishing a connection.