Canon w-e1 - Setting up the IP Address Manually

92
Set up the IP address settings manually. The items displayed vary
depending on the Wi-Fi function.
1
Select [Manual setting].
 Select [OK] and press <0> to go to
the next screen.
2
Select the item to be set.
 Select an item and press <0>. The
number entry screen will appear.
 To use a gateway, select [Enable],
select [Address], then press <0>.
3
Enter the desired values.
 Turn the <6> dial to move the input
position in the upper area and turn
the <5> dial to select the number.
Press <0> to enter the selected
number.
 To set the entered values and return
to the screen for step 2, press the
<M> button.
Setting up the IP Address Manually