43
Connecting via WPS (PIN Mode)
7
Connect to the access point.
Select [OK] and press <0> to
establish a connection with the
access point.
When a connection with the access
point is established, the next screen
is displayed.
8
Select [Auto setting].
Select [OK] and press <0> to
display the setting screen for the Wi-
Fi function selected in step 2 (p.44).
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 92.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
To Next Page
Loading...