83
Responding to Error Messages
Did you hold down the access point’s WPS (Wi-Fi Protected
Setup) button for the specified period of time?
Hold down the WPS button for the period of time specified in the
access point’s instruction manual.
Are you trying to establish a connection near the access
point?
Try establishing the connection when both devices are within reach
of each other.
Connection is in progress by other access points in
Pushbutton Connection mode (PBC mode) of Wi-Fi Protected
Setup (WPS).
Wait a while before trying to establish the connection, or try to
establish a connection in PIN code connection mode (PIN mode)
(p.41).
A problem other than error code number 11 to 69 occurred.
Turn off and on the camera’s power switch.
68: Cannot connect to wireless LAN terminal. Retry from
the beginning.
69: Multiple wireless LAN terminals have been found.
Cannot connect. Retry from the beginning.
91: Other error
To Next Page
Loading...