Cansec MAP1 - Appendix; Suggested Power Supplies & Backup Battery

MAP1 Page 20 of 31
Installation Manual June 2018 • Rev. 1.6
Appendix
Note 1: Suggested Power Supplies & Backup Battery
Part Number
Dimension & Weight
H x W x D approx.
Description
CA-EFLOW4N8D
(battery not included)
Accommodates up to two
(2) 12VDC/7AH batteries.
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x
82.55mm)
6.7 lbs. (3.04 kg)
12/24 VDC selectable output,
4 Amp Enclosure Style Power
Supply with Backup Battery
Charger. Eight individual class
2 rated power limited outputs
rated at 2 Amp. Input 120
VAC, 60 Hz, 3.5 Amp. UL
listed.
CA-EFLOW6N8D
(battery not included)
Accommodates up to two
(2) 12VDC/7AH batteries.
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x
82.55mm)
6.65 lbs. (3.02 kg)
12/24 VDC selectable output,
6 Amp Enclosure Style Power
Supply with Backup Battery
Charger. Eight individual
Class 2 rated power limited
outputs rated at 2 Amp per
output. Input 120 VAC, 60
Hz, 3.5 Amp. UL listed.
CA-EFLOW102N16D
(battery not included)
Accommodates up to two
(2) 12VDC/7AH batteries.
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x
82.55mm)
6.85 lbs. (3.11 kg)
12 VDC, 10 Amp Enclosure
Style Power Supply with
Backup Battery Charger.
Sixteen individual Class 2
rated power limited outputs
rated at 2 Amp per output.
Input 120 VAC, 60 Hz, 3.5
Amp. UL listed.
PA-SLP003
3.63” x 5.88” x 2.5”
(92.20mm x 149.35mm
x 63.50mm)
5.00 lbs (2.27 kg)
Backup Battery 12 VDC 7
Amp Hour. Provides hours of
backup power for above power
supplies.