Need help?Do you have a question about the Cansec MAP1 and is the answer not in the manual?
Lists the main capabilities and specifications of the MAP1 controller.
Highlights critical safety requirements for emergency lockdown functions.
Provides important advice regarding Wiegand cable quality and installation for reliability.
Explains compatibility and necessary adjustments for using H1000 connectors.
Details factory provisioning and available modes like First Access, Webster, and Cloud Lock.
Stresses the need for a battery-backed power supply to prevent data corruption.
Covers automatic IP address acquisition (DHCP) and static IP configuration.
Discusses mounting options and tamper switch connections for enclosures.
Guides on connecting the MAP1 controller to a 12 VDC power supply, including backup options.
Explains how to wire exit buttons and door contact sensors for each door.
Lists recommended power supplies and backup battery options with specifications.
General| Device Type | IP Access Controller |
|---|---|
| Number of Readers Supported | 2 |
| Number of Inputs | 4 |
| Number of Outputs | 2 |
| Communication | TCP/IP |
| Operating Voltage | 12 VDC |
| Reader Technology | Wiegand |
To Next Page
