3
45
English
Operation
1
Power
ON – LED shines green
Standby – LED shines red
DM disconnected from the mains – LED not illuminated (OFF)
2
Mute (muting)
3
Input (signal source selection)
4
Volume (volume control up/down)
5
Play Mode
Stereo (ST) – for music
Movie (MOV) – virtual surround sound for home cinema
Music (MUS) – virtual surround sound for music playback
6
Sound
Bass (BAS) – Adjustment via Volume control (+6... – 6 dB)
Mid-Range (MID) – Mid-range adjustment via Volume (+6 … – 6 dB)
Treble (TRE) – Adjustment via Volume control (+6... – 6 dB)
7
Bluetooth
®
Pairing
Connection with a Bluetooth
®
Wireless Technology enabled source
Memory Function
After the DM system has been temporarily disconnected from the mains it automatically returns
to the last mode selected. All settings (e. g. ON/OFF, volume) remain in place.
Note: After selecting a function the current value will be displayed first. The value is only changed when the button is pressed a second time.
E.g.: Press the “Sound” button briefly – the display will show BAS. Now press the “Volume +” button or the “Volume –“ button. The display
shows the current value. Press the “Volume +” or the “Volume –“ button again to change the value.
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
®
PAIRING
MUTEON
STANDBY
Remote control
To Next Page
Loading...
Need help?
General
