CanyCom SC75 - Contents of the Tool Bag

-13-
Specications 3
Model and Type
SC75
One-Way Dump
Speed km/h(mph) 0-8.0(0-5.0)
Minimum Turning Radius m(ft) 1.5(4.9)
Gradability Degrees 25(Empty)
HST Oil Capacity L(US qt.) 23(24.3)
Drive Train
Main Transmission Twin HST
Steering Twin HST, 1 Lever
Brakes Internally Expanding
Track Size 200×42×72
Tranamission Oil Capacity L(US qt.) 2.0(2.11)
Dumping System
Dumping System Front Dump
Hydraulic
Pump
Type Gear Pump
Max. Speed rpm 2,300
Max. Discharge
L/min(US Gal./min)
17.6(4.65)
Relief Pressure MPa(psi) 9.8(1421)
Cylinder(Bore X Stroke) mm(in.) 60X400(2.36X15.75)
Performance
Max. Angle Degrees 90
Lifting Time Sec 4.0
Lowering Time Sec 3.4
Hydraulic Fluid Capacity L Shared with HST System
*These specications are subject to change without notice.
P e r f o r - m a n c e
No. C o n t e n t Q u a n t i t i y N o t e
1 Operator's Manual 1 This Manual
2 Operator's Manual for the Engine 1
3 Engine Service Tool 1 for Servicing the Engine
Contents of the Tool Bag