User Manual
Page 26 of 95
BASIC MODE functions description:
Safety control
Control allowing the immediate interruption of the treatment. Works only when
the machine is ON and the outputs are active. When the button of the safety
control is pushed, the safety control warning is activated.
In this case, press the OK button to return to the STANDBY status.
Timer
Total treatment time in minutes
When the device is in STOP status, treatment time can be modified using
the buttons INCREASE / DECREASE treatment time..
Elapsed treatment time
When the device starts WORKING, the elapsed time counter starts running,
expressing elapsed time in minutes and seconds.
Status
The device’s status depends on various factors. The following table details the
possible statuses for the basic mode and how to activate them by means of the
keyboard.
To Next Page