Instruction manual CE1122
Please keep this instruction manual for future reference
21
MAINTENANCE
Correct maintenance helps to ensure optimal performance and a long life. Special
care needs to be taken with the grease filter: It should be cleaned on a regular basis
to prevent the build up of grease. To access the filter, proceed as described in the
panel opening chapter.Remove the grease filter, using the special handle.
To refit the grease filter after cleaning, carry out the same operation in reverse
order. To remove the carbon filter, if fitted, follow the same steps as for the grease
filter.
The carbon filter is located immediately above the grease filter. The charcoal filter
has to be removed at first giding it inside the location and then rotating it and
removing it.
Charcoal filters (CAP64CF) should be replaced at least every 6 months. More with
heavy use. These can be purchased from your retailer or directly from Caple at
www.caple.co.uk or call sales on 0117 938 1900
Tepid water and neutral detergents are recommended to clean the appliance, any
abrasive products should not be used. Once cleaned dry with a soft cloth.
Dimensions
CE1122SS/WH_Instruction manual.indd 21 22/03/2018 10:53
To Next Page
Loading...
