Cardinal Detecto PD300 User Manual

PD300
Assembly
Installing the Column and Display, Cont.
2. Place the scale on a desk or table
3. Connect the socket end of the connection cable to the
preset cable in the scale base.
Figure No. 10
4. Align the long slot in the column with the slot in the column holder and then insert the column
into the hole on the column holder.
NOTE! Make sure the preset cable passes through the slots in both the column (the long slot)
and the column holder.
Figure No. 11
5. Insert the M4x8 machine screw through the
column holder into the column and tighten the
screw to attach the column to the column holder.
Column
Slot in
Column
Holder
Preset
Preset
Cable
Figure No.12
Slot in
Column
Cable
Column
Column
Holder
M4x8 Machine Screw
0044-M340-O1 Rev C  ProDoc Series
10

Cardinal Detecto PD300 Specifications

General

Brand	Cardinal
Model	Detecto PD300
Category	Scales
Language	English