ATTACHING AND REMOVING THE G9 FROM THE AUDIO KIT
push!
push!
CLICK !
4.2 GENERAL FUNCTIONS
GENERAL FUNCTIONS
Power ON Press and hold the Mobile Button for 2 seconds
• Light: 3 BLUE ashes
• Sound: Ascending tone
Power OFF Press and hold the Mobile Button for 2 seconds
• Light: 3 RED ashes
• Sound: Descending tone
Volume
Adjust and set volume
of current audio source
Tap the Volume Up or Volume Down Button
Mute speakers Tap Volume Up and Volume Down buttons
simultaneously
Battery level
indicator
Press and hold the Volume Up Button for 2 seconds
Light:
• BLUE = Full charge
• PURPLE = Half charge
• RED = Almost empty
4.3 STATUS LIGHTS
LED Indication Status
None scala rider G9 is OFF
1 BLUE ash every 3 seconds Standby mode
No active audio sources
2 BLUE ashes every 3
seconds
Active mode – Call in progress / music
or other audio source is ON
1 RED ash every 3 seconds Standby mode – Battery is low
2 RED ashes every 3 seconds Active mode – Battery is low
Solid RED Charging
10
| scala rider
®
G9 / G9 PowerSet
10
| scala rider
®
G9 / G9 PowerSet
To Next Page
Loading...
Need help?
General
