channel B. (For details, see Bluetooth Intercom on page 16.)
2. To start or stop a private chat, tap 2 times.
4.1.2.3 MUTING/UNMUTING DMC INTERCOM GROUPS
Muting the DMC intercom mutes your microphone and speaker. Unmuting the DMC intercom restores sound
to your microphone and speaker.
To mute/unmute the DMC group:
1. Confirm your PACKTALK BOLD is in DMC intercom mode (LED flashes green slowly).
If your PACKTALKBOLD is not in DMC intercom mode, press and .
2. On your unit, press the control wheel for 2 seconds.
4.1.2.4 MUTING/UNMUTING THE MICROPHONE
This feature is available with software update 5.10. To make sure you have the latest software, download the
Cardo Update tool to your computer, and update your unit.
To mute the microphone on your PACKTALKBOLD:
1. Tap the Intercom and Audio buttons.
A beep indicates that your microphone is muted.
2. To unmute your microphone, tap the Intercom and Audio buttons once more.
A beep indicates that your microphone is in active mode.
4.1.2.5 BACKGROUND AUDIO LEVEL AND AUDIO SOURCE PRIORITIES
The PACKTALKBOLD can use parallel audio streaming to stream audio from two connected sources
simultaneously, so that you can listen to your music or the FM radio while holding a DMC intercom
conversation. PACKTALK BOLD automatically manages your music and FM radio volume while using DMC
intercom. PACKTALK BOLD also automatically manages DMC intercom volume with mobile phone calls and
GPS. For more information on background audio level and audio source priorities, see Using Parallel Audio
Streaming on page 25.
15
To Next Page
Loading...
Need help?
General
