Cardo Systems Packtalk Bold - Reset to Factory Settings; FAQ

5.3 RESET TO FACTORY SETTINGS
This option deletes all paired units, devices and all configuration settings.
To perform a factory reset through the unit:
1. Check that your PACKTALK BOLD is in Standby mode (see PACKTALK BOLD LEDIndications on page
28).
2. Simultaneously press + + for 5 seconds.
The LED flashes purple 5 times slowly, confirming that pairing has been reset.
5.4 FAQ
Additional answers to common problems can be found at https://www.cardosystems.com/support/packtalk-
bold-support/.
23