CONTENTS OF RETAIL BOX
INTRODUCTION
Congratulations and thank you for choosing the scala rider
TeamSet
pro
Bluetooth® Headset package for bikers.
This User Guide will help you operate the headset, but you should rst
familiarize yourself with the Bluetooth functionality of your cellular phone
and/or GPS device before using the scala rider
TeamSet
pro
.
This retail box contains two scala rider
TeamSet
pro
headsets that
already factory paired (see details below).
The scala rider
TeamSet
pro
headset can serve as a stand alone unit
for the following connectivity modes:
communication in full duplex
Bluetooth communication**
Each
TeamSet
pro
headset can establish an audio connection
with one Bluetooth device at a time. Read the section “Using the Headset”
on how to switch the audio connection between the paired devices.
We wish you a great scala rider experience and remain available for any
inquiries you may have. Just write us at
Visit to download this
manual in other languages
____________________
* Full duplex calls allow you to speak and hear the other party speak simultaneously
** Mobile phones that do not support the Bluetooth Handsfree prole may prevent you
from using the Redial and Call Reject features. The
TeamSet
pro
supports headset and
handsfree proles at up to 10 m / 30 ft. distance from the mobile phone
*** Requires Bluetooth compatibility on the part of the GPS device
Intercom Button
• Initiate/Terminate
Intercom call
• Reject a call
CTRL – Control Button
• Power On, Power O
• Answer/End Call
• Pairing
Charging
Jack
Volume
Down
Volume
Up
Two Headsets
Two Helmet Clamps
Tab
Sliding Plate
Microphone
Right Speaker
(long cord)
Left Speaker
(short cord)
MP3 Jack
Back
Plate
English
3
scala rider
®
TeamSet
™
PRO