The scala rider
TeamSet
pro
The scala rider
TeamSet
pro
oers VOX technology for safe and
hands-free operation of some key functions.
For incoming calls, just pronounce loudly any word (e.g. “hello”). To
reject an incoming call, you need only to remain silent for about 15
seconds. To reject an intercom call remain silent for 30 seconds.
While on standby press and hold the Volume Up and Volume Down
Buttons simultaneously for three seconds until you hear a beep. The
default status is Voice Connect enabled.
The Enable/Disable Voice Connect feature aects only the
Intercom functionality.
MAKING AND RECEIVING MOBILE
PHONE CALLS
Tap the CTRL Button or speak loudly any word
of your choice during an incoming call.
Tap the Intercom Button or remain silent for
15 seconds during an incoming call.
Tap the CTRL Button to end a call.
During Standby, tap the CTRL Button and
state the name of the person you wish to
call. This feature is supported only by mobile
phones that support the Voice Dial feature.
Press and hold the Volume Down Button for
three seconds during Standby.
If your Bluetooth mobile phone is paired to a Bluetooth GPS
device, not directly to the scala rider
TeamSet
pro
, some of the
above Phone functions may not be available.
When the headset is on an active phone call, any Buddy Intercom call
request will be rejected automatically.
Once the phone call audio link drops, you can initiate and accept
Buddy Intercom calls.
STATUS LIGHT STATES
None
Alternating red/blue ashes
Rapid red ashes
1 blue ash every 3 seconds
2 blue ashes every 3 seconds
1 red ash every 3 seconds
2 red ashes every 3 seconds
Solid red
English
9
scala rider
®
TeamSet
™
PRO