CareCo Corvus Rapide - Operation of Corvus Rapide Control Panel; Control Panel Identification

10
4. OPERATION OF CONTROL PANEL
4.1 IDENTIFICATION OF CONTROL PANEL
BUTTON NAME OPERATION
Hazard Light Press the Hazard lights button once to switch on, press again to switch o
Hi/Lo Switch High / Low mode, see section 4-2
Left Turn Signal
Press the turn signal button once to switch on, press again to switch o
(switches itself o automatically after 30 seconds)
Right Turn Signal
Press the turn signal button once to switch on, press again to switch o
(switches itself o automatically after 30 seconds)
Deceleration
Press low speed button once to decrease speed, the minimum speed is
1
Acceleration
Press acceleration button once to increase speed, the maximum speed
is 8
Horn Press horn button once to sound warning tone when necessary.
Headlight Switch Press headlight switch to turn on headlight and tail light.
Mode Setting Press mode setting button to set dierent mode.
Figure 5 - Corvus Rapide Control Panel