Carlson Boretrak2 User Manual

BT2 user manual - H-5911-9004-02-B Page | 65
9.5 Pairing a Boretrak2 probe with the tablet
The Windows tablet and the Boretrak2 probe communicate via a Bluetooth connection. For this connection to
operate, the tablet and Boretrak2 probe must be ‘paired’.
When purchased as a complete system, the Boretrak2 is supplied ready to use, with the Bluetooth connection
already established. However, if you have purchased your own tablet, or if you are reconfiguring a device or swapping
over a probe, you may find it necessary to establish / re-establish communications.
The Boretrak2 probe must be powered ON.
In your tablet go to Settings > Bluetooth & other devices. Ensure the Bluetooth switch is turned ON.
The Boretrak2 probe is identified over Bluetooth by its serial number. To operate in conjunction with the PDA, the
probe must be listed under Other devices.
Tap Add Bluetooth or other device. The Add a device window appears.
Figure 72 Carlson Boretrak icon
Figure 73 Settings > Bluetooth and other devices

Carlson Boretrak2 Specifications

General

Brand	Carlson
Model	Boretrak2
Category	Measuring Instruments
Language	English